High Performance Computing MCQ Questions and Answers HPC UNIT -1 . What is High performance computing ? HPC – High Performance Computing is the use of parallel processing for running advanced application programs efficiently, reliably and quickly. The term applies especially to systems that function above a teraflop or 1012 floating-point operations per second. The term HPC is occasionally used as a synonym for supercomputing, although technically a supercomputer is a system that performs at or near the currently highest operational rate for computers. Some supercomputers work at more than a petaflop or 1015 floating-point operations per second.
The most common users of HPC systems are scientific researchers, engineers and academic institutions. Some government agencies, particularly the military, also rely on HPC for complex applications. High-performance systems often use custom-made components in addition to so-called commodity components. As demand for processing power and speed grows, HPC will likely interest businesses of all sizes, particularly for transaction processing and data warehouses. An occasional techno-fiends might use an HPC system to satisfy an exceptional desire for advanced technology.
High Performance Computing MCQ UNIT -1
- Which is the type of Microcomputer Memory
a)Address
b)Contents
c)Both a and b
d)none
Answer c)Both a and b
2. A collection of lines that connects several devices is called
a)Bus
b)Peripheral connection wires
c)Both a and b
d)internal wires
Answer: a)Bus
3. Conventional architectures coarsely comprise of a
a)Processor
b)Memory System
c)Data path
d)All of the above
Answer: d)All of the above
4. VLIW processors rely on
a)Compile time analysis
b)Initial time analysis
c)Final time analysis
d)id time analysis
Answer: a)Compile time analysis
5. HPC is not used in high span bridges
a)True
b)False
Answer: b)False
6. The access time of memory is …………… the time required for performing any single CPU operation.
a)longer than
b)shorter than
c)negligible than
d)same as
Answer: a)longer than
7. Data intensive applications utilize_
a)High aggregate throughput
b)High aggregate network bandwidth
c)high processing and memory system performance
d)none of above
Answer: a)High aggregate throughput
8. Memory system performance is largely captured by_
a)Latency
b)bandwidth
c)both a and b
d)none of above
Answer: c)both a and b
9. A processor performing fetch or decoding of different instruction during the execution of another instruction is called __ .
a)Super-scaling
b)Pipe-lining
c)Parallel Computation
d)none of above
Answer: b)Pipe-lining
High Performance Computing MCQ
10. For a given FINITE number of instructions to be executed, which architecture of the processor provides for a faster execution ?
a)ISA
b)ANSA
c)Super-scalar
d)All of the above
Answer: c)Super-scalar
high performance computing mcq sppu
11. HPC works out to be economical.
a)True
b)false
Answer: a)True
12. High Performance Computing of the Computer System tasks are done by
a)Node Cluster
b)Network Cluster
c)Beowulf Cluster
d)Stratified Cluster
Answer: c)Beowulf Cluster
13. Octa Core Processors are the processors of the computer system that contains
a)2 Processors
b)4 Processors
c)6 Processors
d)8 Processors
Answer: d)8 Processors
14. Parallel computing uses _ execution
a)sequential
b)unique
c)simultaneous
d)None of above
Answer: c)simultaneous
15. Which of the following is NOT a characteristic of parallel computing?
a)Breaks a task into pieces
b)Uses a single processor or computer
c)Simultaneous execution
d)May use networking
Answer: b)Uses a single processor or computer
16. Which of the following is true about parallel computing performance?
a)Computations use multiple processors
b)There is an increase in speed
c)The increase in speed is loosely tied to the number of processor or computers used
d)All of the answers are correct.
Answer: d)All of the answers are correct.
17. __ leads to concurrency.
a)Serialization
b)Parallelism
c)Serial processing
d)Distribution
Answer: b)Parallelism
18. MIPS stands for?
a)Mandatory Instructions/sec
b)Millions of Instructions/sec
c)Most of Instructions/sec
d)Many Instructions / sec
Answer: b)Millions of Instructions/sec
19. Which MIMD systems are best scalable with respect to the number of processors
a)Distributed memory computers
b)ccNUMA systems
c)Symmetric multiprocessors
d)None of above
Answer: a)Distributed memory computers
high performance computing mcq questions
20. To which class of systems does the von Neumann computer belong?
a)SIMD (Single Instruction Multiple Data)
b)MIMD (Multiple Instruction Multiple Data)
c)MISD (Multiple Instruction Single Data)
d)SISD (Single Instruction Single Data)
Answer: d)SISD (Single Instruction Single Data)
21. Which of the architecture is power efficient?
a)CISC
b)RISC
c)ISA
d)IANA
Answer: b)RISC
22. Pipe-lining is a unique feature of _.
a)RISC
b)CISC
c)ISA
d)IANA
Answer: a)RISC
23. The computer architecture aimed at reducing the time of execution of instructions is __.
a)RISC
b)CISC
c)ISA
d)IANA
Answer: a)RISC
24. Type of microcomputer memory is
a)processor memory
b)primary memory
c)secondary memory
d)All of above
Answer: d)All of above
25. A pipeline is like_
a)Overlaps various stages of instruction execution to achieve performance.
b)House pipeline
c)Both a and b
d)A gas line
Answer: a)Overlaps various stages of instruction execution to achieve performance.
High Performance Computing mcq pdf unit 1 Download
26. Scheduling of instructions is determined_
a)True Data Dependency
b)Resource Dependency
c)Branch Dependency
d)All of above
Answer: d)All of above
27. The fraction of data references satisfied by the cache is called_
a)Cache hit ratio
b)Cache fit ratio
c)Cache best ratio
d)none of above
Answer: a)Cache hit ratio
28. A single control unit that dispatches the same Instruction to various processors is__
a)SIMD
b)SPMD
c)MIMD
d)none of above
Answer: a)SIMD
29. The primary forms of data exchange between parallel tasks are_
a)Accessing a shared data space
b)Exchanging messages.
c)Both A and B
d)none of above
Answer: c)Both A and B
30. Switches map a fixed number of inputs to outputs.
a)True
b)False
Answer: a)True
Data Analytics sppu mcq
high performance computing mcq, high performance computing mcq sppu,
Digital Image Processing MCQ | Basics Of Image Sampling & Quantization
Basic of Digital Image Processing
ALL unite digital Image Processing MCQ
HPC MCQ UNIT -2
HPC MCQ UNIT – 3
HPC MCQ UNIT – 4
HPC MCQ UNIT – 5
HPC MCQ UNIT – 6
READ MORE…
If you found this post useful, don’t forget to share this with your friends, and if you have any query feel free to comment it in the comment section.
Thank you 🙂 Keep Learning !